fire safety regualtions for lorries

Fire Safety Regulation for Lorries/ Trucks

The fire safety regulations for lorries and trucks explain how many extinguishers are required in terms of weight of the vehicle. The table below sets out a summary of the minimum requirements for fire extinguishers depending on weight of the vehicle for HGVs or Lorries. Dry Powder extinguishers are specified because it is known that they are suitable for tackling fires of Class A (solids such as wood, paper or any carbonaceous materials), Class B (fires involving liquids) and Class C (fires involving gases) therefore they are commonly known to be the best fit for a vehicles fire safety needs.

Vehicle (max permissible mass)Minimum dry powder fire extinguisher provision
Up to 3.5 tonne2kg for cab
plus 2 kg
Over 3.5 tonne and up to 7.5 tonne2 kg for cab
Total 8 kg (usually one 6 kg but other provision is acceptable as long as there is one 6 kg)
Over 7.5 tonne2 kg for cab
Total 12 kg (including at least one 6 kg)
Any vehicle carrying dangerous goods under the” small load” limit or carrying only infectious substancesOne 2 kg only
fire safety regulations for signs

Fire Safety Signs Regulations Summary

The basic fire safety regulations for signs are as follows. According to this legislation, workplaces should follow the below stipulations:

  • All fire safety signs should clearly and effectively mark escape routes and exits
  • Fire doors and escape routes must be clearly marked
  • Signage must be displayed along an exit route
  • All fire safety signs should be illuminated
  • Escape route signs should feature direction arrows
  • Emergency exit signs above fire doors should not have arrows
  • All fire escape route signs should be in picture form
  • Braille and tactile fire safety signage should also be displayed
  • Signage should be visible from a distance and at an appropriate height
  • Employees should be trained in the use of fire extinguishers
  • Employees should be aware of the location fire alarms
  • Employees should be trained in what to do in the event of fire
  • All fire-fighting equipment must be clearly identified

What are the Fire Safety Signs?

Fire safety signs are designed to provide safety information, warnings about hazards, or to give information. Fire safety signs and symbols come in the different colours such as red, green, yellow or blue. In the fire safety regulations for signs it states how signs must be visible. Therefore quite often, fire safety signs are photo-luminescent so that they can be seen in the dark or through smoke.

There are four main categories of fire safety signs:

Fire Action Notice Signs

These signs provide information on what to do in case of fire. They will display the phone number of the fire brigade, what exits to use if there is a fire, where the assembly points are, and any additional information. Fire action notices must be displayed by fire alarms and at final exit doors.

Fire Exit, Fire Door and Fire Assembly Signs

Although some premises that have simple layouts may not require fire exit signs, they are mandatory for complex buildings. Some premises may require directional signs that show the shortest escape routes.

Fire doors must carry a sign that states: ‘Fire door, keep shut’. Some fire doors will require signage that provides instructions on how to open the door.

Fire assembly signs show where employees or inhabitants must gather once they have exited the building. The assembly point should be far enough away from the premises to avoid hazardous debris and ensure that the emergency services personnel can operate without hindrance. Assembly points should be accessible for old, young, or disabled people.

Fire Equipment and Fire Alarm Signs

If a fire breaks out, then employees will need to know what firefighting equipment they should use and where to access it. These signs will usually be affixed to the walls next to fire extinguishers or on the extinguishers stands themselves.

Fire alarm signs must be clearly positioned next to alarms and call-points. They will often have fire action notices next to them to provide information for the person who is raising the alarm.

Warning and Prohibition Signs

Warning signs alert employees to fire hazards on the premises. This can include flammable substances such as gas, chemicals or oil. Prohibition signs are used to stop people from engaging in activities that may heighten fire risks, for example, smoking or using naked flames. Warning and prohibition signs are often grouped together.

What do Blue Signs Mean in Fire Safety?

Blue safety signs contain information on mandatory actions that must be carried out to maintain fire safety. They are circular and feature white text or graphics.

What do Red Signs Mean in Fire Safety?

Red fire safety signs provide information on the location of firefighting equipment, supplementary information, or information on prohibited actions. Prohibition signs are circular with red borders, white backgrounds and black text and graphics. Fire equipment signs are square shaped with red backgrounds featuring white text and graphics.

What do Yellow Signs Mean in Fire Safety?

Yellow fire safety signs are warning signs that provide information on flammable substances in the immediate area. They are usually – although not always – triangular in shape with yellow backgrounds, black borders and black text and graphics.

the best fire extinguisher for cars

The Best Fire Extinguishers for Cars

What is the best fire extinguisher for cars? To answer that question, first the features of a great fire extinguisher for cars must be looked at. So for an Extinguisher to be the right fit for a car, it has to be able to deal with:

  • Class A Fires (Wood, Paper or Any Carbonaceous materials)
  • Class B Fires (Flammable Liquids)
  • Class C Fires (Flammable Gases)

Bearing this in mind there are only a few extinguishers that can combat all of these classes of fire.

This then makes a Dry Powder fire extinguisher the most suitable and affordable choice. These extinguishers however aren’t recommended for use within a confined space so should be avoided for use inside motorhomes and caravans when there are people close. But instead for those cases a AFF Foam fire extinguisher is recommended.

Here at Fireology we have a great range of products that would be suitable for use in cars, caravans and motorhomes. It is important that the right type of extinguisher is used on each fire, we aim to aid that choice with our expertise here at Fireology. 

Our pick of the best fire extinguisher for cars is :

  • CommanderEDGE 1kg ABC Dry Powder Fire Extinguisher

Or

  • CommanderEDGE 2kg ABC Dry Powder Fire Extinguisher

In the UK fire extinguishers aren’t required by law, but in other European countries they do. So to find out what safety equipment is required in different countries across Europe, click the link here and find our blog post about safety regulations whilst driving across Europe.

fire extinguishers in films

Fire Extinguishers in Films

fire extinguishers in films

Fire Extinguishers in Films

Fire Extinguishers in films are a pretty popular prop, so here are 5 popular encounters with the big red cannisters in famous movies.

1. Gravity (2013)

This film features a notorious scene where Sandra Bullock’s character Dr. Ryan Stone ejects herself from her Soyuz spacecraft and propels herself towards Tiagong. To do this she uses a fire extinguisher as a makeshift thruster to travel to the rapidly deorbiting spacecraft. The fire extinguisher is shown to push Dr. Stone through space and is used to project her towards the passing spacecraft. This scene was actually busted on MythBusters Jr. where they attempted to see if it would actually work. They found that the fire extinguisher lacked enough force to fully change the direction of the user and just didn’t have enough force like it was shown to have in the movie.

gravity
irreversible

2. Irréversible (2002)

This psychological thriller starts off with a horrific and graphic scene featuring a man getting his face smashed in by a fire extinguisher. This comes from Vincent Cassel’s character Marcus thinks he has found the man that killed his girlfriend. The fight then starts in a gay bar in Paris. With the potential murderer getting the advantage in the fight, Marcus’ friend steps in and beats the potential murderer’s face using a fire extinguisher. This scene then gets very graphic and disturbing to watch as the man beats the potential murderer’s face to a pulp, using the fire extinguisher. This film plays in a reverse order of the scenes creating an interesting look on the events that happened on that Paris night.

3. WALL-E (2008)

This fantastic childhood staple film is an absolute classic. The scene near the end of the film shows WALL-E launched into space in a space shuttle in an attempt to retrieve the plant. EVE then projects herself out to save WALL-E but then sees the spacecraft explode. WALL-E bursts past EVE using a fire extinguisher as a thruster in space to project himself through space. The scene then follows on with EVE and WALL-E shooting through space around the giant ship (The Axiom). WALL-E uses his fire extinguisher to propel him around with EVE in celebration of saving the plant. This film tells an amazing story and was selected for preservation in the United States Film Registry by the Library of Congress as being “culturally, historically, or aesthetically significant”. 

extinguishers in films
fire extinguishers

4. Salt (2010)

This American action-thriller film is about the woman Evelyn Salt being accused of being a Russian sleeper agent. She then goes on the run in an attempt to clear her name. The scene depicts Salt stuck in a room with armed police closing on her location. Salt then creates a weapon using chemicals and a fire extinguisher to then shoot at the police when they get into the room to allow for her escape. This then works with her shooting the fire extinguisher at them as they are about to enter. This then leaves them unconscious on the floor, allowing for Salt to steal a gun and escape the complex. In her escape she shoots at security cameras to restrict the over watchers vision on her location.

5. Nightmare at the Museum (2006)

The fantastic fantasy film depicts a museum night guard played by Ben Stiller. His simple job quickly turns into something else when the exhibits come to life after dark. In the scene where the cavemen are depicted ‘discovering fire’, the fire spreads and Ben Stiller’s character Larry quickly puts out the fire with his foam fire extinguisher. This quickly turns into the cavemen tasting the foam and throwing it at Larry’s face. Then follows Larry’s famous quote “Why?”, which erupts the cavemen into laughter. The scene continues with Larry having foam on his face and around his mouth. This then leads to the infamous slapping the monkey scene. Larry and a monkey continuously slap each other over a set of keys to the museum. 

fire extinguishers in films
history of fire extinguishers

History of Fire Extinguishers

Look into the History of Fire Extinguishers

A brief look into the history of the fire extinguisher, the red cannisters that we see every day.

history of fire extinguishers

1819

In the history of fire extinguishers, this one is an important one. In 1819 Captain George William Manby invented the first version of the modern fire extinguisher. His extinguisher was a copper vessel and contained 3 gallons of pearl ash solution under compressed air pressure.

history of fire extinguishers
history of fire extinguishers

Late 1800's

In the late 1800’s the soda-acid extinguisher was invented. These extinguishers would work by containing 1 or 2 gallons of water and had sodium bicarbonate mixed in. In the cylinder a vial was suspended and contained concentrated sulphuric acid. 

This vial was then broken, using two different methods depending on the style of extinguisher. Once the acid was mixed with the bicarbonate solution, carbon dioxide gas would be expelled and this would in turn pressurise the water. The pressurised water was forced from the canister through a short length of hose and a nozzle.

1912

Around 1912 Pyrene pioneered the carbon tetrachloride or CTC extinguisher, these extinguishers projected the liquid from a brass or chrome container by hand pump, onto the fire. They worked by interfering with the chemical reaction that takes place. This extinguisher was suitable for liquid and electrical fires. The vapours and combustion by-products emitted were highly toxic and did lead to multiple deaths when used in a confined area.

old fire extinguishers

Mid to Late 1900's

In the mid to late 1900’s the modern type of fire extinguisher used different extinguishing agents. Manufacturers of extinguishers generally use some type of pressurised vessel to store and discharge the extinguishing agents.

The first type of extinguisher used pressurised air to approximately 1 bar (approximately 5 times a car tyre pressure). 

The second type of fire extinguishers are the “gas cartridge” type. These operate in a similar manner, but the pressure source is a small cartridge of CO2 gas at 130 bars, rather than air.

2011

In 2011 Britannia introduced the first self-maintenance extinguishers, which for the first time in extinguisher history do not require service engineers to visit sites and maintain them. These units overcame the problem of corrosion, lining damage and pressure loss by being designed of composite plastics, Aramid and brass. 

This extinguisher can withstand higher pressures than ordinary steel extinguishers. Britannia’s self-maintenance extinguishers cannot corrode and do not require any attention other than ensuring that the units are not missing, damaged or discharged. They do not require refills after 5 years, either. Also they are kitemarked and MED approved. 

To find out more about these types of extinguisher, click the link here and learn more about them on Britannia’s website.

guide to the classes of fire

A Guide to the Classes

Introduction

This is a guide into all the different classes of fire that our extinguishers aim to combat. This guide is designed to help you make the correct decision with fire safety. When it comes to choosing the correct type of fire extinguishers for your specific needs, we are here to help.

This guide of the classes will show what the differences between the classes are and what makes each class of fire unique. We will also tell you what extinguishers are able to combat each class of fire.

Class A Fires

Class B Fires

Class C Fires

Class D Fires

Electrical Fires

Class F Fires

Class A Fires

Class A fires are generally caused by a naked flame or items of high temperatures coming into contact with combustible materials. Class A fires are fires involving solids such as paper or cardboard, any carbonaceous item fires are defined as Class A fires. This is the most common type of fire as these items are the most combustible and are the most common type of fuel.

Almost all premises are at risk of Class A fires due to the common use of such materials. There are many types of fire extinguisher that can be used on Class A fires. These are: Water, Foam, MultiCHEM, Powder, Wet Chemical and Water Mist.

Class B Fires

Class B fires are fires involving flammable liquids, these can be any of the likes of:  Cleaning fluids, Solvents, Fuels, Inks, Adhesives and Paints. Class B fires only make up for 2% of all fires but make up a massive 21% of all fire deaths. This Class of fires are extremely dangerous, this is why many different types of extinguisher aim to tackle them to try to protect the users. The main key to staying safe from Class B fires is prevention, this is why up to date COSHH assessments are key. For the initial stages of Class B fires, a fire bucket could be used, link to our blog post on fire buckets here.

Many settings may have a risk of a potential Class B fire. This is why most locations must have a fire extinguisher that is fit to fight such a fire. Fire extinguishers suitable for Class B fires are: MultiCHEM, Foam, Powder and CO2.

Class C Fires

Class C fires are fires involving flammable gases. This could be natural gas, LPG or any other gases forming a flammable or explosive atmosphere. Class C fires can be tackled with fire extinguishers. Although, the best method of stopping these types of fires is shutting off the supply of the gas.

Manufacturing and industrial warehouses, chemical plants or anywhere that stores large quantities of flammable gases are at particular risk of Class C fires. Class C fires must be tackled using a Powder fire extinguisher.

Class D Fires

Class D fires are niche so therefore are not covered by the conventional types of fire extinguishers. Class D fires are fires involving combustible metals such as potassium, lithium and magnesium. This type of fire is uncommon but is more prevalent in laboratories, warehouses and metal fabricators.

Only specialised fire extinguishers are suitable for use on Class D fires. These are: L2 and M28 fire extinguishers.

Electrical Fires

Electrical fires aren’t their own class of fire because they are seen as more a form of ignition than a fuel. Electrical fires are a risk to all premises that use electricity. They occur when live electrical equipment is involved in a fire. They must not be tackled by a liquid-based fire extinguisher. This is because water is a conductor and will spread the current across a greater area if used. This could potentially endangering the user of the fire extinguisher.

As a result, only Powder (for electrical currents under 1000v) and CO2 fire extinguishers are suitable here, as they do not rely on a liquid agent.

Class F Fires

Class F fires are fires involving deep fat frying and spillages of flammable oils near heat sources. This type of fire poses the highest risk to restaurants and kitchens. These types of fires can be made significantly worse by using a liquid-based agent to extinguish it.

As a result, specialised MultiCHEM, Water Mist and Wet Chemical fire extinguishers are essential. These extinguishers are used in settings that use cooking fats or oils.

water vs water plus vs water mist fire extinguishers

Water vs Water Plus vs Water Mist Fire Extinguishers

What are the differences of Water vs Water Plus vs Water Mist fire extinguishers? Which is best and what is the best for certain situations?

Water fire extinguishers are the most accessible fire extinguisher, this is likely due to their low price point and their ability to fight the most common type of fire. The Water extinguishers are given an A fire rating, meaning they are capable and suited for extinguishing Class A type fires.

Water Plus extinguishers are an easy upgrade on the regular water extinguishers. They feature a wetting agent which allows them to achieve a greater fire rating. This helps to meet regulations on minimum fire ratings per floor or room of a building. This extinguisher still only features an A fire rating, meaning it can only extinguish Class A fires.

Water Mist extinguishers are another option as an upgrade from the regular water extinguisher. This is due to it having an AF fire rating. This means they are capable of extinguishing Class A and Class F fires. Class F fires are fires involving deep fat frying and spillages of flammable oils near heat sources. These are often found in kitchen environments. The Water Mist extinguisher doesn’t offer an increased A fire rating from the Water extinguisher but instead offers an F fire rating. This is useful if there is a risk of a Class F fire but if not it is a wasted feature.

The Water Plus extinguishers’ boosted A fire rating is great when the fire risk is higher. This is because the boosted fire rating allows the location meet regulations. The increased price point of this extinguisher is justified if the extra A fire rating. This makes it useful when the fire rating is needed to meet regulations of what fire rating is required.

Water extinguishers are the basic option with the lowest price. These are still a great option when the paired with another extinguisher. If the only main fire risks in the area fall into the Class A fire group. When the premise is small, this standard water extinguisher is the perfect choice.

In summary each of these types of extinguisher meet the basic need for a Class A fire extinguisher. The Water Plus and the Water Mist are both upgrades from the standard Water extinguisher in their own ways. The Water Plus offers an increased A fire rating and the Water Mist offers an AF fire rating over the basic A fire rating of the other two extinguishers. So, in the Water vs Water Plus vs Water Mist fire extinguishers debate. There is no ‘best one’ of the three, it is just a case of what is need or a certain scenario.

different types of fire extinguishers

Types of Fire Extinguishers

Introduction

This is a guide into all the different types of fire extinguishers that we offer at Fireology. In this guide we will show you all the different types of fire extinguishers. As well as what are each of their strengths and weaknesses.

It will explain what classes of fire each one of the extinguishers can tackle. Also this will state what extinguisher suits best to each class of fire. This guide shows the benefits of all of these types of extinguishers. As well as why a certain type of extinguisher may be a better fit for you compared to a different type of extinguisher.

Water Fire Extinguishers

Foam Fire Extinguishers

Dry Powder Fire Extinguishers

CO2 Fire Extinguishers

WetCHEM Fire Extinguishers

L2 Powder Fire Extinguishers

MultiCHEM Fire Extinguishers

Monnex Dry Powder Fire Extinguishers

M28 Powder Fire Extinguishers

Water Fire Extinguishers

Water fire extinguishers are the most accessible fire extinguisher. This is likely because of their low price point and their ability to cover the most common type of fire. Water extinguishers are given an A fire rating, meaning they are capable and suited for extinguishing Class A type fires.

Class A fires are fires involving solids such as paper or cardboard, any carbonaceous item fires are defined as Class A fires. This is the most common type of fire as these items are the most combustible and are the most common type of fuel.

Water fire extinguishers do not have the ability to cope with Electrical fires and must not be used on Electrical fires. This type of fire extinguisher is most appropriate for areas that’s biggest fire risk is a solid material and therefore Class A fire.

Foam Fire Extinguishers

Foam fire extinguishers are a very commonly used type of fire extinguisher. This is because they are a good multi purpose fire extinguisher that can tackle Class A and Class B fires. Foam fire extinguishers are given an AB fire rating, meaning they are capable of extinguishing Class A and B Fires.

Fires labelled Class A are fires involving solids such as paper or cardboard, any carbonaceous item. Class B fires are fires involving liquids, these can be any of the likes of: Cleaning fluids, Solvents, Fuels, Inks, Adhesives, Paints. Class B fires only make up for 2% of all fires but make up a massive 21% of all fire deaths.

Class B fires are extremely dangerous, this is why many different types of extinguisher aim to tackle them to try to protect the users. The main key to staying safe from Class B fires is prevention, this is why up to date COSHH assessments are key. The best fire extinguishers to combat Class B fires are Foam and Dry Powder extinguishers.

Dry Powder Fire Extinguishers

Dry Powder fire extinguishers are a very versatile fire extinguisher that is a main staple in a lot of fire safety setups. These fire extinguishers can be used on Class A, Class B, Class C and Electrical fires making them the most versatile fire extinguisher on the market. Dry Powder extinguishers are given an ABC fire rating but can also tackle Electrical fires.

Class A fires are fires involving solids such as paper or cardboard, any carbonaceous item. Class B fires are fires involving liquids, these can be any of the such as cleaning fluids, solvents, fuels, or inks. Class C fires are fires involving gases, this could be natural gas, LPG or any other gases forming a flammable or explosive atmosphere.

Class C fires can be tackled with fire extinguishers, the best method of stopping these types of fires is shutting off the supply of the gas. Electrical fires aren’t their own class of fire because they are seen as more a form of ignition than fuel. But when Electricity is present, Water must not be used. Unlike Foam extinguishers, Dry Powder extinguishers have the ability to be used on ‘running’ flammable liquid fires.

CO2 Fire Extinguishers

CO2 fire extinguishers are perfect for fighting Class B fires and Electrical fires. Its properties allow it not to damage electrical equipment so therefore makes it a great choice for situations where electrical fires are a risk. CO2 extinguishers have a B fire rating but can also combat electrical fires. Class B fires are fires involving liquids, these can be any of the such as cleaning fluids, solvents, fuels, or inks. Electrical fires aren’t their own class of fire because they are seen as more a form of ignition than fuel.

CO2 extinguishers are good as they do not leave a harmful residue behind, this is what makes them desirable compared to a lot of the other extinguishers that can fight Class B fires. CO2 extinguishers are also looked at as more environmentally friendly as CO2 is in the air around us anyway so it does not contribute to global warming. 

WetCHEM Fire Extinguishers

WetCHEM fire extinguishers are perfect for kitchens as they are able to fight Class F fires. WetCHEM extinguishers have an AF fire rating making them equipped to fight Class A or F fires. Class A fires are fires involving solids such as paper or cardboard or any carbonaceous items. Class F fires are fires involving deep fat frying and spillages of flammable oils near heat sources. These fires are often found in kitchen environments.

WetCHEM fire extinguishers offer an “easy clean” design making them ideal for kitchens and maintaining hygiene regulations. This type of fire extinguisher works by creating a layer of foam on the burning oil or fat, stopping the supply of oxygen so the fire isn’t fuelled any further. For tiny Class F fires a fire blanket could be used but in most cases a WetCHEM extinguisher would be recommended.

These types of fire can be extremely dangerous and only a small sized fire would be recommended to be fought with one of these extinguishers.

L2 Powder Fire Extinguishers

L2 Powder fire extinguishers are a unique type of fire extinguisher aimed at combating Class D fires. Class D fires are niche so therefore are not covered by the conventional types of fire extinguishers. Class D fires are fires involving combustible metals such as potassium and magnesium.

Where L2 powder extinguishers thrive is that they are equipped to deal with lithium fires. This is what makes them stand out over M28 extinguishers (which can’t deal with lithium fires). Class D fires are very dangerous as if the wrong extinguishing medium is used, it can actually accelerate the fire. This can happen if a chemical or water extinguisher is used. 

MultiCHEM Fire Extinguishers

MultiCHEM fire extinguishers are a great multi class fire extinguisher. They are given an ABF fire rating, this means they are able to combat Class A, B and F fires. This makes them a step above WetCHEM extinguishers and ordinary Foam extinguishers. This is because they can combat an extra type of fire than each. Class A fires are fires involving solids such as paper or cardboard or any carbonaceous items. Fires labelled Class B are fires involving liquids, these can be any of the such as fuels, or inks. Class F fires are fires involving deep fat frying and spillages of flammable oils near heat sources. This fire is often found in kitchen environments.

The glory of this type of fire extinguisher is how versatile it is and can be. This perhaps could be used as a perfect kitchen/bar fire extinguisher as its abilities are perfect to combat most of the scenarios that could occur.

Monnex Dry Powder Fire Extinguishers

Monnex dry powder fire extinguishers are one of the most trusted high performance dry chemical powder for high risk firefighting applications. This extinguisher is given a BCE fire rating making it equipped to tackle Class B, Class C and Electrical fires.

Fires labelled Class B fires are involving liquids, these can be any of the such as fuels, or inks. Fires labelled Class C are fires involving gases, this could be natural gas or any other gases forming a flammable or explosive atmosphere. Electrical fires aren’t their own class of fire because they are seen as more a form of ignition than fuel.

It is the preferred choice when tackling fires involving hydrocarbon oils, gasoline, diesel and liquefied natural gas. These extinguishers can be used where those materials are stored and or processed. It’s especially effective against industrial chemicals like alcohol, ketones, ethers and esters. These are materials which conventional dry chemical powders find more difficult to knock down.

The grain of the powder inside of Monnex extinguishers is measured and made sure that when projected from the extinguisher it will ensure maximum projection. This allows the operator to maintain a good distance from the fire.

M28 Powder Fire Extinguishers

M28 powder fire extinguishers are a great option when in a laboratory or a workshop environment. Wherever a potential risk of a fire comes from metals. This fire extinguisher is given a D fire rating, this means it can only be used on Class D fires. Class D fires are fires involving combustible metals such as potassium and magnesium.

Where the M28 loses out in comparison to the L2 Powder extinguisher is that it cannot put out lithium fires. This isn’t important if lithium fires aren’t a risk. If lithium fires aren’t a risk you will benefit from the M28’s lower price point. Class D fires are very dangerous as if the wrong extinguishing medium is used, it can actually accelerate the fire. This can happen if a chemical or water extinguisher is used. 

how do you deal with lithium-ion battery fires

Lithium-ion Battery Fires 5 – How do you deal with lithium-ion battery fires?

We know how a Lithium-Ion (Li-Ion) battery fire may occur. But how do you deal with lithium-ion battery fires? Li-Ion battery fires you may think would be classed in class D of fire and so therefore would be able to be extinguished by a Dry Powder extinguisher. But no, they are not classed as a class D fire even though lithium is a metal, the nature of the fire means that they cannot be extinguished like a usual class D fire.

Products

The new products that are being developed and produced of late are AVD Vermiculite extinguishers and EV fire blankets. The EV fire blanket is specifically designed for electric vehicles and is placed directly over the electric car to maintain the fire. These fires are much harder to put out as the fires themselves are around 700℃ to 1,000℃ and can burn for up to 24 hours. But with the EV fire blanket it can drastically reduce this time by depriving the fire with oxygen. 

The AVD Vermiculite extinguishers are products aimed to try to target all types of Li-Ion battery fires. They are a water based extinguishing system with vermiculite particles suspended in the water to act as a smothering tool to stop the fire from receiving oxygen. These extinguishers are designed to deprive the fire from heat, oxygen and also act as an electrical barrier.

British Standard

Currently there is no British standard for these types of extinguishers and technology, and also there is no Kitemark that is able to be displayed on the extinguisher itself. This is because there is no current actual fire rating for this type of extinguisher so it is unable to to kitemarked. The industry has been particularly slow in trying to get these extinguishers to a certain standard and also finding a fire rating for them. This therefore isn’t allowing the widespread of this technology as it is seen as not as much of a know entity.

Check out our last iteration of Lithium-ion battery fires here.

how do you deal with lithium-ion battery fires

damage and penetration

Lithium-ion Battery Fires 4 – Damage and Penetration

Spreading knowledge and knowing about the dangers of Lithium-ion (Li-ion) batteries is important as they are a growing danger in the modern home and in modern life in general. Whether the battery has damage or penetration is important to think about as this creates a large amount danger. They are seen as a horrible danger with a spontaneous nature, e-bikes and e-scooters have been banned from all London transport systems after a number of fires on the network caused by these vehicles.

Damage and Penetration to Li-ion Batteries

Li-ion battery fires can sometimes occur after disposal of the batteries themselves. These are due to when the battery is penetrated or crushed. These scenarios are a danger when disposing of and maybe even still at the end of the life of one of these batteries. This comes from when potent electrolytes leak through the hole in the battery, this then often creates a chemical reaction that releases heat. This then in-turn heats the other cells in the battery and can lead to thermal runaway. Thermal runaway is when a cell of the Li-ion battery enters a self heating uncontrollable stage which leads to the explosion and then fire.

Disposal of Li-ion Batteries

This is a huge danger when disposing these batteries, on a domestic scale officials recommend placing and leaving the batteries into salt water for at least two weeks then disposing them as hazardous waste. If one of these batteries were to get to landfill and get damaged this could lead to thermal runaway and then could cause an absolutely huge fire damaging the whole site by engulfing it into flames. So when disposing and dealing with damaged Li-ion batteries please take great care.

Check out our last iteration of Lithium-ion battery fires here.

damage and penetration

damage and penetration